Brass IP 68 Cable GLAND
Technical Specification
Size : | PG 7 to PG 48 and M12 to M63 |
Standard : | EN 60259,EN 50262:1999 |
Application : | Suitable for everyplace where IP68 protection is required against dust, liquid, water, strain, twist and vibration. IP68 cable glands are mostly used in measuring and controlling instruments, machineries and equipment. Provided shake and twist proof protection. |
Function: | Metric, PG |
Ingress : | Maximum strain relief through clamping range. Trapezoidal thread with high torque guarantee. |
Thread: | IP68- 15 bar |
Operating Temp: | -20°C to +100°C |
Material: | Nickel Plated Brass |
Insert: | Polyamide PA6 |
Accessories: | Lock Nut, Neoprene washer ,Polyamide insert and Perbunan O RingMAKE-SONA, MCI |
PG Thread Gland Selection Chart
Gland Size | Thread “C” | Thread Length”D | Cable Range Dia. | (A/F) | (A/C) | CAT NO. | |
Min. “A” | Max. “B” | ||||||
PG-7 | PG-7 | 5.00 | 3.00 | 6.50 | 14.00 | 15.55 | CIP68-7 |
PG-9 | PG-9 | 6.00 | 4.00 | 9.00 | 17.00 | 19.00 | CIP68-9 |
PG-11 | PG-11 | 6.00 | 6.00 | 11.50 | 20.00 | 22.00 | CIP68-11 |
PG-13.5 | PG-13.5 | 6.00 | 7.00 | 13.00 | 22.00 | 24.00 | CIP68-13 |
PG-16 | PG-16 | 6.50 | 8.00 | 15.00 | 24.00 | 26.60 | CIP68-16 |
PG-21 | PG-21 | 7.00 | 11.00 | 19.00 | 30.00 | 33.00 | CIP68-21 |
PG-29 | PG-29 | 8.00 | 16.00 | 26.00 | 40.00 | 44.00 | CIP68-29 |
PG-36 | PG-36 | 9.00 | 22.00 | 34.00 | 50.00 | 55.50 | CIP68-36 |
PG-42 | PG-42 | 10.00 | 27.00 | 38.00 | 58.00 | 55.50 | CIP68-42 |
PG-48 | PG-48 | 10.00 | 35.00 | 44.00 | 64.00 | 70.00 | CIP68-48 |
Tolerance + 1mm
Metric Thread Gland Selection Chart
Gland Size | Thread “C” | Thread Length”D” | Cable Range Dia. | (A/F) | (A/C) | CAT NO. | |
Min. “A” | Max. “B” | ||||||
M 12 | M 12 | 5.00 | 2.50 | 6.50 | 14.00 | 15.50 | CIP68-12 |
M 16 | M 16 | 5.00 | 4.00 | 8.50 | 17.00 | 19.00 | CIP68M-16 |
M 20 | M 20 | 6.00 | 7.00 | 13.00 | 22.00 | 24.00 | CIP68-20 |
M 25 | M 25 | 7.00 | 8.00 | 16.00 | 27.00 | 30.00 | CIP68-25 |
M 32 | M 32 | 8.00 | 11.00 | 21.00 | 34.00 | 36.00 | CIP68-32 |
M 50 | M 40 | 8.00 | 15.00 | 27.00 | 42.00 | 46.00 | CIP68-40 |
M 40 | M 50 | 9.00 | 22.00 | 35.00 | 55.00 | 60.00 | CIP68-50 |
M 63 | M 63 | 10.00 | 35.00 | 48.00 | 65.00 | 70.00 | CIP68-63 |
Tolerance + 1mm